How To Update IDS Software on Your Laptop to the Latest Version

Introduction:
In today's technologically advanced world, software updates are crucial for optimal performance and security. This holds true for IDS (Integrated Diagnostic System) software installed on laptops to connect and perform diagnostics for Ford vehicles. Regularly updating IDS software ensures compatibility with the latest vehicle models and resolves any existing issues. In this article, we will guide you through the process of updating IDS software on your laptop to the latest version.

Why Update IDS Software:
Updating IDS software is essential for maintaining optimal security and performance for your laptop. With each update, the software becomes more stable and efficient, as previous errors are fixed. Additionally, updates often introduce new features and improvements to enhance diagnosis accuracy.

Steps to Update IDS Software:
Here are the steps to update your IDS software to the latest version:

1. Check for the Latest Version:
Begin by visiting the website of the software provider or contacting their customer support to determine the latest version of IDS software available.

2. Download the Latest Version:
Once you have the information about the latest version, download the software from the provider's website. Ensure that you download it from a trusted source.

3. Install the Software:
After the download is complete, follow the installation instructions provided by the software provider. Make sure to carefully read and understand each step to avoid any errors.

4. Launch and Update:
Once the installation is complete, launch the IDS software. It should prompt you to update to the latest version. Follow the on-screen instructions to complete the update process.

Compatibility:
Before updating IDS software, it's important to ensure compatibility with your laptop's operating system. IDS software is designed to work with Windows XP or Windows 7. If you have a different operating system, check with the software provider for compatibility options or updates.

Conclusion:
Updating IDS software on your laptop to the latest version is crucial for optimal performance and security. By following the steps outlined in this article, you can easily update your IDS software and ensure compatibility with the latest vehicle models. Remember to regularly check for updates to stay up-to-date with evolving automotive technology and enjoy an enhanced diagnostic experience.

Disclaimer: This article is intended for informational purposes only. The process of updating IDS software may vary depending on the specific software version and laptop configuration. It is recommended to consult the official documentation or contact the software provider for detailed instructions and support.

SVCI 2020 Registry Value RxFIFO or TxFIFO Have Wrong Data solution

 

Problem
The SVCI 2020 is failed to communicate with a new BMW E46 2001 GEN that has been replaced recently. The warning “Registry value RxFIFO or TxFIFO have wrong data! Maybe there are problems! Under Windows NT/XP run OBDSetup.exe.” keeps coming out.

I’ve tried several times but was unable to clear the error. Any ideas?

Solution
Please follow the steps below, then re-connect the device to read fault codes again.
Step1. Open the SVCI 2020 installation directory.
Step2. Enter “C: Program File (x86)\Abrites Commander Software List\Common2\” directory and copy BMW folder to “C: Program Files (x86)\Abrites Commander Software List\Common\” directory

Hope this is helpful.

How to change VCM2 serial number

I have figured out how to change the serial number of the Ford VCM 2 as well as enter test mode, and get a root shell on it.

You’ll need a microSD card for this to work.

1. Use IDS 86.

2. Recover your VCM2.

a. Describing how to recover is beyond the scope of this post. Search the forums for instructions.

b. After recovery your VCM2 should be at VCM2 FW version 2.1.1.5.

3. Wait about 90 seconds after the VCM2 beeps before proceeding. We are waiting for the SD card to be populated.

4. Unplug the VCM2 and eject the SD card.

5. Mount the SD card with a linux machine.

6. On the SD card open ‘apps/vci-diags/hwtest-scripts/self-test.sh’ for editing.

7. Add the following line to the file:

touch /etc/vci/config/testmode

8. Cleanly unmount the SD card and insert it back into the VCM2.

9. Plug the VCM2 unit into the computer and wait 90 seconds past beep before proceeding.

10. Launch IDS.

11. Go to system utilities

12.Select ‘Launch Monitor Tool’ and confirm on the pop up.
13. Select ‘Run System Diagnostics’ > ‘Next’ > ‘Test a VCM II Module’ > ‘Next’

14.Once the test completes unplug, wait a couple seconds, and then re-plug the VCM2 into the computer.
15. Wait about 15 seconds past when the VCM2 beeps and point your browser to http://192.168.171.2

You are now in the test mode web server.
a. To set a new serial number select ‘Set New Serial Number’ and proceed with serial number setting.
The default serial number is: 1211-31605352
b. To get a root shell Telnet to 192.168.171.2 you will be dropped to a root shell without providing login credentials.
c. To stay in testmode at next reboot select ‘Set Repair Test Mode’. This has to be done once per boot or you will have to go through this whole process to re-enable test mode.

Here Be Dragons:
To those who would go poking around, tread carefully. I accidentally ran cgi-bin/total-reflash and wiped my VCM2.

My bootloader was still intacted and available on pins 24 & 25 of the HDL26-PL-B connector.

How to Install Software for Ford and Mazda

Firstly please prepare two laptops, one for software for Ford, the other is for Mazda. This is the instruction for the tool Ford

Ford IDS Software Free Download :
Ford_IDS V124:  https://mega.nz/folder/6dwzgaJR#XW2q1xPdbgKV4XtZQqkB0w
Mzd_IDS V124:   https://mega.nz/folder/iQp1UACZ#d4ey2cWHmaEMf9n2dTcTAQ
Ford_Mzd V124: https://mega.nz/folder/OV4RRC6B#seCWP6UCzOPWEDYlQxZ1iQ

Here are the installation steps for Ford.
1. Install Ford IDS-124
2. Wait for the installation of Ford IDS – 124, and restart the computer
3. Install the Ford original VCI software_ 1.0.0.10.exe
4. Install VCI manager (Ford) 20.11.24 and Ford IDS driver
5. Wait for the VCI manager and Ford IDS driver installation to complete
6. Connect device and install IDS patch
7. Use IDSpatch to open IDs and start diagnosis.

Here are the installation steps for Mazda.
1. Install Mazda IDS-124
2. Wait for the installation of Mazda IDS – 124, and restart the computer
3. Install VCI manager (Mazda) 20.11.24 and Mazda IDS driver
4. Wait for the VCI manager and Ford IDS driver installation to complete
5. Connect device and install IDS patch
6. Use IDSpatch to open IDs and start diagnosis.

how to change the serial number of the Ford VCM 2

I have figured out how to change the serial number of the Ford VCM 2 as well as enter test mode, and get a root shell on it.

You’ll need a microSD card for this to work.

1. Use IDS 86.

2. Recover your VCM2.

a. Describing how to recover is beyond the scope of this post. Search the forums for instructions.

b. After recovery your VCM2 should be at VCM2 FW version 2.1.1.5.

3. Wait about 90 seconds after the VCM2 beeps before proceeding. We are waiting for the SD card to be populated.

4. Unplug the VCM2 and eject the SD card.

5. Mount the SD card with a linux machine.

6. On the SD card open ‘apps/vci-diags/hwtest-scripts/self-test.sh’ for editing.

7. Add the following line to the file:

touch /etc/vci/config/testmode

8. Cleanly unmount the SD card and insert it back into the VCM2.

9. Plug the VCM2 unit into the computer and wait 90 seconds past beep before proceeding.

10. Launch IDS.

11. Go to system utilities

12.Select ‘Launch Monitor Tool’ and confirm on the pop up.
13. Select ‘Run System Diagnostics’ > ‘Next’ > ‘Test a VCM II Module’ > ‘Next’

14.Once the test completes unplug, wait a couple seconds, and then re-plug the VCM2 into the computer.
15. Wait about 15 seconds past when the VCM2 beeps and point your browser to http://192.168.171.2

You are now in the test mode web server.
a. To set a new serial number select ‘Set New Serial Number’ and proceed with serial number setting.
The default serial number is: 1211-31605352
b. To get a root shell Telnet to 192.168.171.2 you will be dropped to a root shell without providing login credentials.
c. To stay in testmode at next reboot select ‘Set Repair Test Mode’. This has to be done once per boot or you will have to go through this whole process to re-enable test mode.

Here Be Dragons:
To those who would go poking around, tread carefully. I accidentally ran cgi-bin/total-reflash and wiped my VCM2.

My bootloader was still intacted and available on pins 24 & 25 of the HDL26-PL-B connector.

Free Download SVCI J2534 Ford IDS V125 Software & Patch

STIC SVCI J2534 Ford IDS software V125 has been tested and verified working without problem Obd2tool.com shares free download resources.

Software Operation System: Win7 64bit, Win 8, Win 10

SVCI J2534 ford QuickLoader V1.2.5 patch
https://mega.nz/file/fvpkxQAR#7Drt3vyEPSRGpbe4Tum5PzKvTH-5zbPJj6p4EFOLr2A

Free download Ford IDS 125
https://mega.nz/file/2ng0FajQ#n9Zf600-CvQtv48W2BToBaNqf9RK2KemJjHo63ZV4mI

SVCI J2534 VCI V1.0.0.0
https://mega.nz/#!anBG3CZa!SyersJzW3BA_FLFuBBK-hFU2JwGNvuPuWhxrT6QZWsk

No password!

SVCI J2534 Ford vs VCM II vs Other Ford J2534

Function	SVCI J2534	Genuine VCM II	Other Ford J2534	NOTE
Automatically startup without license	Yes	Need license	–
Support online module programming	Yes	Yes	–
Support online PATS/RKE learning	Yes	Yes	–
Support SAE J1850 PWM 83.3K baud rate	Yes	Partly	–
Support FEPS 18V programming voltage	Yes	Yes	Partly
Support FEPS 5-20V adjustable voltage	Yes	Partly	–
Support reading programming voltage	Yes	Partly	–
Support EEC-V multiple items data logger	Yes	Partly	–
Support PTEC multiple items data logger	Partly	Partly	Yes	MY 1994-2000 Ford
Support SAE J1850 module programming	Partly	–	–	MY 2000-2006 Ford
Support power balance performance test	Partly	Partly	–	MY 1995-2006 Ford
Support CANBUS module programming	Partly	Partly	Partly	MY1995-2006 Ford
Support online software update	Yes	–	–
Calculate incode pre-2010 for free	Yes	–	–

SVCI has been tested working with FJDS, FDRS programs for new Fords.

SVCI has fixed J1850 PWM protocol module programming bugs in Feb. 2021. Users can set reprogramming voltage to 18V on PIN 13 and do reprogramming for Ford J1850 PWM vehicle.

SVCI J2534 Ford J1850 PWM Module Reprogramming Guide

Guide to install SVCI J2534 ford software:
Step 1: Download IDSFord software
Step 2: Download SVCI-J2534-for-ford patch software
Step 3: Download IDS-VCI (Ford) software
Step 4: install software directly that downloads

VCM2 Only see 2003 Lincoln Town in HS Mode

Problem:

2003 Lincoln Town Car Signature with Park Aid

Interface OHP ELMconfig USB with manual HS//MS switch

Connects successfully in HS mode and I can see DDM,DSM LCM, ATC,ABS, PATS and other modules – but not PAM.

Suggestion:

The ISO9141 Protocol has been supported by Both Forscan And ELM327 based adaptors since the beginning versions. HS/MS switch must be in the HS Can position for these early SCP/PWM and ISO equipped Vehicles. MSCan Position will have no connection.

WDS and NGS are the obsolete Ford Diagnostic software and hardware that were replaced by IDS and the VCM and VCM 2

Your Lincoln May have a DLC UBP pin 3 but as far as I know the Cars never had a UBP network or anything connected to it as it was mostly used in the Trucks and SUV’s. There would be about 3 to 5 volts positive to Ground if anything is connected to Pin number 3. Another member on this forum had checked his Lincoln and the 3 pin was there but it was dead.

If the PAM module was responding to Forscan through the adaptor, it should have shown up in the ISO network tree along with any other modules that are likely on that same network(The overhead consol display that the PAM warning appears on would have to be on that network) and also appeared in the vehicle configuration list.

If it is not showing up there then you will need to gain access(Remove trim panels and such like. Check manual for module location and connector views) to the display module connector and the PAM module connector to check if the positive voltage is present in the PAM module connector and the ground connection out of the connector has continuity.
Then continuity from the PAM module connector to each of the sensors connectors in rear bumper will be next!

If the module is receiving 12 V+ Power and is grounded( A working module should be showing in the network list with DTC’s if these and ISO wiring are good) and sensor wiring and connectors check out then the module communication wires from the PAM module Connector to the Display’s connector and to the DLC Pin number 7 will be the next to check as the Display gets the PAM signal from the PAM module over the ISO network.

If You say you have Service manual then You are about to make good use of it!
It should have wiring and connector Diagrams and a Pin Point flow chart in it!

If the PAM module is receiving 12V+ and has a ground connection the sensor connections check out(sensors and connectors are prone to moisture and corrosion) and the Display and PAM module’s ISO Connection to No7 DLC Pin all check out then you have a PAM module that has probably died!
It does Happen!

Good luck! Hope this is of some help?

Question:

Thanks for the feedback. The manuals are helpful except, in this case a bit confusing. In the Module Comunications Network section it says the PAM is on the UBP network and refers me to the Parking Aid section in the same manual, but in that section it clearly says the PAM is on the ISO 9141 network as I mentioned above. I do see the Restraint Control Module (RCM) show up so I guess I do have access to ISO9141.

As for truck vs car – I have noticed the Panther platform (Crown Vic, Grand Marquis, Town Car) seems to “borrow” a lot of components from the truck lines, esp. Explorer. Maybe it’s the similarities in construction and drive line.

Answer:

You are not alone in the confusion you are experiencing! I ran into this same predicament with my 03 Expedition. The Wiring manual I have shows the PAM in Module communications on the UBP (Violet Wire) network but Forscan reads it on the ISO(Light Blue/White wire) network and the Service manual says PAM is on the UBP network.

It seems that even Ford is confused about this!

If your TC has Climate Controlled Seats and you are not seeing them on the network list they may also be on the UPB network as are mine in the Expy.

If Pin 3 shows any voltage(5 V+ Key on in my Expy) to ground (Pin 4 or 5 in the DLC) you may have a UPB network and PAM may be on it in this case and that is only available with A VCM2 in Forscan. Never have tried with anything else except VCX Nano and that was an exercise in futility. Never got it to connect at all to either of these “Old Guys”! Had to go for a VCM2 Clone (Used it to help the team get UBP support working back in Version 2.3.09) and it has been good so far! Getting hard to find a good one of those unfortunately.

Only other way to tell, and you may be going in there in any case, is to to gain access to the PAM Module connector and see what wire colours are going into the Module Communications pin. Violet likely means UBP, Light Blue/White means ISO, at least it is in the two trucks (03 Expy and 05 F150) I have here, but your TC wiring Diagram may differ!

Question:

Yea “FORD Engineered” is sometimes a complement and sometimes a curse..

VXDIAG Ford IDS V124 Cannot Do 2020 Ford Explorer

 

VXDIAG Ford IDS V124 Cannot Do 2020 Ford Explorer

Problem:
My vxdiag vcx nano Ford IDS V124 failed to communicate with a 2020 Ford Explorer. It says ‘use only Ford Diagnosis and Repair System (FDRS) for this vehicle.’  Any idea how to make it work?

Solution:
As the IDS says, you have to use FDRS on this vehicle.

Ford Diagnostic & Repair System (FDRS) – The next generation factory Ford Motor Company vehicle diagnostic Software designed for use with VCM II, VCMM and J2534 compatible Vehicle Communications Interfaces (VCI). FDRS provides complete dealership level vehicle diagnostic coverage for some 2018 and forward vehicles. FDRS provides superior capabilities, is more user-friendly and provides more diagnostic tools than IDS. The cloud-based system ensures the technician is provided the latest software every time FDRS logs into the Ford network.

Ford vehicles by model year supported on FDRS
*   Bronco 2021
*   Bronco Sport 2021
*   EcoSport 2018-2021
*   Edge 2021
*   Escape 2020-2021
*   Expedition 2018-2021
*   Explorer 2020-2021
*   F-150 2021
*   Mustang 2021
*   Mustang Mach-E 2021
*   Ranger 2019-2021
*   SuperDuty 2020-2021
*   Transit 2020-2021
*   Transit Connect 2019-2021

Lincoln vehicles by model year supported on FDRS
*   Aviator 2020-2021
*   Corsair 2020-2021
*   Nautilus 2021
*   Navigator 2018-2021

VXDIAG VCX NANO Ford J1534 has been tested working without problem with FDRS.

HOW TO RESET Ford Bronco Oil Service Maintenance Light

 

Ford Bronco Oil Reset Quick and simple instructions for resetting the Oil service maintenance reminder indicator light on a Ford Bronco from the model years 2020-2021-2022.

4 Easy Steps to Reset

Step 1 Switch the ignition on. Do not start the engine.

Step 2 Using the driver information button on the steering wheel. Press the MENU button then Scroll down to Oil Life then press the OK button.

Step 3 While the Oil Life is Displayed, Press and hold the Ok Button.

Step 4  While Pressing and hold the OK button, the Oil life will reset to 100%.

Turn off the ignition, then start the engine to verify that the service life has been reset.

Quick info About Ford Bronco

The Ford Bronco was originally developed as an off-road vehicle in the 1960s. Ford discontinued the Bronco after the 1996 model year. The nameplate has been used on other Ford SUVs, namely the 1984–1990 Bronco II compact SUV and the 2021 Bronco Sport compact crossover. The Ford Bronco was introduced in 1987 as a short-wheelbase version of the eighth-generation Ford F-150. The Bronco returned its 4.9L inline-6, 5.0L V8, and 5.8L H.O.

V8 engines from the previous generations. The Bronco was unveiled on July 13, 2020. The car has a 2.3-liter turbocharged EcoBoost inline-four that makes 300 hp and 325 lb-ft (441 N⋅ft) of torque. Custom interior appointments include a walnut steering wheel and front bucket seats with russet suede bolsters.

If you want to know more about ford, please click Ford trouble Repair.

How to Install Software for Ford and Mazda

Firstly please prepare two laptops, one for software for Ford, the other is for Mazda. This is the instruction for the tool Ford

Here are the installation steps for Ford.
1. Install Ford IDS-124
2. Wait for the installation of Ford IDS – 124, and restart the computer
3. Install the Ford original VCI software_ 1.0.0.10.exe
4. Install VCI manager (Ford) 20.11.24 and Ford IDS driver
5. Wait for the VCI manager and Ford IDS driver installation to complete
6. Connect device and install IDS patch
7. Use IDSpatch to open IDs and start diagnosis.

Here are the installation steps for Mazda.
1. Install Mazda IDS-124
2. Wait for the installation of Mazda IDS – 124, and restart the computer
3. Install VCI manager (Mazda) 20.11.24 and Mazda IDS driver
4. Wait for the VCI manager and Ford IDS driver installation to complete
5. Connect device and install IDS patch
6. Use IDSpatch to open IDs and start diagnosis.

Mazda IDS V124
Ford_Mazda IDS Patch (No need VMware)

Ford IDS V124 Installation package:

https://mega.nz/folder/6dwzgaJR#XW2q1xPdbgKV4XtZQqkB0w

MZD IDS V124 Installation package:

https://mega.nz/folder/iQp1UACZ#d4ey2cWHmaEMf9n2dTcTAQ

Ford and Mzd patch:

https://mega.nz/folder/OV4RRC6B#seCWP6UCzOPWEDYlQxZ1iQ

Ford VCM 2 FAQ

 

What is the difference between VCM2 and VCM3?
The VCM3 in fact does all 1996 up ford/lincoln/mercury just like the VCM 2 its fully backward compatible, but it is slightly faster with most cars, which is nice, eliminating diagnostic time, and has a built in capacitor for power storage for use when vehicle ignition is turned off and back on but module needs to still …

How to Update Ford VCM 2 Diagnostic Tool Firmware?
1. Please press your device power button.
2. Long-press the power button, connect to VCM2 device power supply, wait for all 4 indicators turn on, then release the button.
3. Run the IDS software, system will prompt to update firmware.

What is the difference between IDS and FJDS?
IDS is a flexible diagnostic tool that utilizes standard computing platforms to work with Ford’s VCM, VCM II, VCMM and VMM devices. FJDS is a flexible diagnostic tool that utilizes standard computing platforms to work with Ford’s VCM II or J2534 compatible devices.

How do I update my Ford IDS software?
Your computer must be network activated and have an Internet connection to receive automatic notification of updates. To activate: System Utilities->Network Options ->Activate Page 4 Page 4 4. Select “Software Update” and click the blue tick. A software update popup will be displayed.

What can Ford IDS do?
Ford Integrated Diagnostic System (IDS): The IDS application will perform the identical functions of the WDS and allows dealership technicians to diagnose and service Ford, Lincoln, Mercury vehicles. IDS is enhanced WDS software that was modified to run on a standard laptop platform, and utilizes the VCM and VMM.

Is Ford id software Free?
If you wanna get the latest ford ids software v112, you can get it here now, obd2tool.com team will share it with you free.

Ford_IDS V121 Installation package:
https://mega.nz/folder/ZIdlnALA#3JGZEjJItP5by2VwvxFaZA

Mzd_IDS V121 Installation package:
https://mega.nz/folder/8BsVACIQ#8Xn-1juY-WOUrxArMglANg

Ford_Mzd V121 patch:
https://mega.nz/folder/OV4RRC6B#seCWP6UCzOPWEDYlQxZ1iQ

What is the full form of IDS software?
An intrusion detection system (IDS) is a device or software application that monitors a network or systems for malicious activity or policy violations.

What is Vxdiag?
VXDIAG VCX Nano GDS2 and Tech2Win Diagnostic Programming System for GM/Opel. Despite the advanced functionality, this VXDIAG VCX Nano is actually very simple to use. It is designed for the ordinary car owner. With it, you can diagnose various onboard systems and do relearn as well as advanced reset.

What software does Ford use?
Ford uses Sigmund with SolidWorks® 3D CAD software to ensure superior quality. Glenn Reed, a Ford mechanical technical expert based in Dearborn, Michigan is a power user.
What is Ford Fdrs software?

Ford Diagnostic & Repair System (FDRS) – The next generation dealer diagnostic software. The factory Ford Motor Company vehicle diagnostic Software designed for use with Ford VCM II, VCMM and J2534 compatible Interfaces. FDRS provides complete dealership level vehicle diagnostic coverage for 2018 and forward vehicles.

What is GM MDI?
The GM MDI 2 is the Global Diagnostic Interface tool for both current and future GM vehicles. It replaces the MDI introduced in 2007 and offers a compact communication module with increased processing power and security to offer faster transfer of data between a vehicle’s onboard ECU network with an auxiliary CAN bus.

How do I get Ford as built data?
You generally will find the As Built data by finding the “Service Publications” tab. Enter the VIN in the dialogue box there. Then click on the “Oasis” tab then hit the “As Built” button.

What is Ford as built?
The Ford As-built data is a list of code parameters that represent the specific functions of your Ford vehicle. The Ford As-built data can be accessed using software like FORScan. With FORScan, you can configure and program the values of the As-built data to apply changes to the functionalities of your vehicle.

What is as built data?
According to Business Dictionary, as-builts are a “revised set of drawings submitted by a contractor upon completion of a project or a particular job. The final as-built drawings include any and all of the following, as well as every other change made during the construction phase of a project: Modifications.

(Solved) VCM2 firmware is newer than IDS software

 

Recently，Obd2tool has received some question about Ford VCM2 firmware downgrade,and obdexpress found the same problem in the mhhauto OBDII scan forum.

Here you are:

I just get VCM2 and instaled IDS v86 and when I start sw error I get that VCM firmware is newer then IDS sw.
How to do?
Customer solutions from the MH forum:

Press and hold reset button after that insert usb to pc still hold reset button when you will hear beep after that release reset button.

If it does not works….

Try to use this Ford VCM II Software setup v2.1.119.3. I have Chinese clone Ford VCM II and working with Ford IDS v86, Mazda IDS v91 and with JLR SDD v138 with this software setup too. My VCM have no problem with update downgrade I had installed Ford IDS v95 after that v86 and no problem update downgrade. When I installed JLR SDD v138 I had to update VCM to this version and after that was not functional with Ford IDS v86 after installing this setup was all functional.

Ford VCM II v2.1.119.3:
https://mega.co.nz/#!LhNUDDzS!lqgQfn7AwXM_E-BxBj2mToJNd52w6HElT_l3mpBAUcU
(RUN v2.1.119.3 on a computer without any IDS or SDD
Start VCI Manager and press update /start
you can do this without press the button on vcmii)

When I want update or downgrade VCM I have to only connect VCM with PC not need connect VCM to OBD. I have installed this softwares on VMware each separately. Each with new clean windows xp. I have not installed newest Ford IDS v95 for example because I don`t know how to freeze system still after 5 days license k.o.  But I had installed this new version Ford v95 and worked this new software update without problem. I install V94 and after that IDS said me is new version v95 I downloaded it and it worked.

I am using V94, and I was told I need OSCH VCI MAMAGER2.1.119.3, NOT 2.1.19.19

TizWazsaid, “IF YOU ARE USING VERSION 94, YOU WILL HAVE WRONG VERSION BOSCH VCI MAMAGER , IT WILL BE 2.1.19.19
YOU NEED 2.1.119.3
you need to press the reset button on the vcmII WHILE CONNECTED TO 12V, then when you see all lights flash at once on the vcmii, you put to usb , wait for beep release reset button on VCMII and start VCI MANAGER.
BUTTONS IN VCI MAAGER SHOULD COME ALIVE BUT YOU NEED TO DO IT WITH VERSION 2.1.119.3
SO IN ids 94, you can go to program and features and uninstall version 2.1.119.19 , reboot and install 2.1.119.3
to install MAZDA IDS With ford VCMII”

I downgrade my vcm2 firmware to work with Ford IDS v86, and now ford is ok for me.
I followed a youtube video and I installed (on free IDS PC) Mazda IDS v88 (because I readed that v88 will work with same firmware as ford v86) . Changed Bosch VCI manager files from ford into mazda and now when start vcm manager ask me to update to newer version , but I not wanna update and skip that.
When start Mazda IDS also told me that must update, so which version of mazda will work with same ford v86 fw? Must I search for Mazda v86??

Note: the version software is unimportant , its the ETAS version that matters .
2.1.119.3
you use the SAME one across all JLR, MAZDA, FORD.
IF ORIGINAL VCMII YOU CAN USE 2.1.119.19

If clone Ford VCMII, USEthat etas version for your FORD, MAZDA, and JLR

Enjoy and good luck!

How to activate Ford VCM2 IDS Special Function

 

Ford VCM2 IDS Special Function

With Ford VCM 2 clone with IDS, how to enable or activate Special Function in the menu Module Programming/Programmable Parameters/Car Configuration Parameter(s)? Here is the how-to guide from a CT member. It’s a customer experience; try at your own risk.

Ok just had a play and i managed to get to enter the code (here: 60274)

I found where IDS stores these codes:
C:\Program Files\Ford Motor Company\IDS\Runtime\Registry.xml
Under <key name=”UPDATEFUNCTIONS”>
Going to try them out.
Enter the code
00008 – IDENT_APPLY_PATCHES_VIA_FLOPPY
00009 – IDENT_UPDATE_PTU_FROM_FLOPPY
32287 – IDENT_LAUNCH_APP_MCP_REST
60503 – IDENT_LAUNCH_REGRESSION_RECORDER
27001 – IDENT_LAUNCH_FT_EOL_CP_MZ_01
32247 – IDENT_LAUNCH_SERVICE_ROUT
24040 – IDENT_ENABLE_VALIDATION_MODE
24041 – IDENT_DISABLE_VALIDATION_MODE
23761 – IDENT_LAUNCH_APP_FT_DATA_REC
81105 – IDENT_LAUNCH_APP_TSBSSMLIST
53061 – IDENT_IGNORE_MCP_INHALE
26503 – IDENT_LAUNCH_APP_VVAG
81104 – IDENT_LAUNCH_APP_FTW_SHIP_MODE_01
29124 – IDENT_TOGGLE_FORD_EXTRANET_INTRANET_URLS
60274 – IDENT_LAUNCH_CCC_ENGINEERING_APP
32227 – IDENT_LAUNCH_PROPSHAFT_BAL_APP
48712 – IDENT_LAUNCH_GENERIC_RCM_CONFIG_APP
28487 – IDENT_LAUNCH_FT_ICCMSP_MZ_01_APP
28097 – IDENT_TOGGLE_BATTERY_MONITORING
70263 – IDENT_LAUNCH_GENERIC_DIAG
71863 – IDENT_MCP1
63296 – IDENT_LAUNCH_FTW_RKE_MODE_01_APP
08080 – IDENT_LAUNCH_DETAILED_NETWORK_DIAG
32267 – IDENT_LAUNCH_APP_ENG_SUPPORT_TOOL

Enter the code 60274
It changes the ccc option in module programming to a different list with more options and also appeared to give me icons to read and write dumps,
But I ran out of time to play more and see what options did, I did try to disable my seat belt off warning buzzer but it failed to work, Other peoples input would be nice once you test it…
See my photos, get the first page up as shown then click update/ special functions on your right hand side
As for getting nothing to appear in special function through VCM2 IDS, i had two option in there, read config file and modify, Also for me the tool box module programming, 3rd option down had changed to allow what i would normally alter within ccc as well as a as built option which i do not normally see on this year of car, It had speed items for one listed, were as this is found on later fords than mine in the pcm on first page.

How to use Ford VCM2 clone program Ford module

 

Ford module programming with Ford VCM 2 clone
VCM2 manual: NEW module programming using Ford IDS software

You need Ford IDS software, original or crack

(VCM2 genuine definitely is the best solution, but a high-quality one should work great, not  cheap crappy tools)

VCM 2 is the new Ford OEM diagnostic tool

When installing a new module, the configuration data must be transferred from the old module beforeit is removed. The new module of Ford IDS Software will then be programmed using this information. Use the followingsteps to download the data from the existing module and program the new module:

Step 1: Select the toolbox tab at the top of the screen

Step 2: Select “Module Programming”

Step 3: Select the tick mark or the Enter key

Step 4: Select “Programmable Module Installation”

Step 5: From the fly out menu, select the type of module to be installed

Step 6: Select the tick mark or the Enter key

Step 7: Make sure that an Internet connection has been established and then select “Confirm”

Step 8: Follow the instructions on the screen. These instructions vary depending on the type ofmodule being installed.

NOTE: Be sure to follow these instructions in the exact order that they are given. Do not remove or install any modules until instructed to do so. Failure to follow the instructions correctly may result in the configuration data received during vehicle identification to program incorrectly or not at all.

Step 8A: If Ford Module Programming was unable to retrieve the configuration data due to either

a non-functioning module or a module which was removed before the data was retrieved, the

application will request that the user obtain information from the Module Build Data (As Built)

database. Access to this database is included in the Ford Module Programming subscription. The

data can be obtained by doing the following:

● Go to the Motorcraft website (www.motorcraft.com)
● Go to the Technical Resources area
● Log in using the User ID and password set up when the subscription to Ford Module

Programming was purchased

● Select “My Subscriptions”
● Select “Ford Module Programming”
● Select “Module Build Data (as Built)”
● Enter the Vehicle Identification Number (VIN) and select “Submit”
● Write down the information that was requested by the Ford Module Programming

application

● Return to the Ford Module Programming application and enter the requested information

Step 9: If necessary, apply the reprogramming label to the PCM
If an emissions recall has been performed or a required emissions-related TSB has been completed,an Authorized Modification label must be placed on the PCM. These labels can be purchased at the parts counter of a Ford or Lincoln/Mercury dealership.

NOTE: It is the responsibility of the technician to inform the customer that Ford Motor Company will not reimburse the vehicle owner for field service actions that are not completed at a Ford or Lincoln/Mercury dealership.

Step 10: When the “Programming complete” screen appears, select the tick mark or the Enterkey. If PATS initialization is required, Ford Module Programming may automatically link to the PATSparameter reset and/or key relearn procedures. Two ignition keys may be required to complete the

PATS initialization procedure.

Step 10A: If PATS initialization is required and Ford Module Programming did not link to thatfunctionality automatically, go to the Toolbox tab and select “PATS”. Detailed instructionsare provided in Section 6.

Can I use Ford VCM2 clone for Suzuki diagnosis

 

Is it possible to use a Ford VCM II unit for Suzuki diagnosis with SDT 2?
Yes!

The basic steps
– install IDS software in clean VM Windows 7 32 bit.
– downgrade firmware to v2.1.119.19
– Mazda-V94
– install SDT SDT-II_soft_2140025
– in C:\Program Files\Bosch\VTX-VCI copy all files from “VCI Software (Ford-VCM-II)” to “VCI Software (6516-Suzuki)”
and run.

In detail…

For owners of Ford VCM II (dual-board), an instruction (more specifically a review) for installing and configuring the Ford VCM II to work with the Suzuki SDT-2 program.

The site of the program is posted (sold) version 2.8.0.46, on the network (thanks to the distributor) 2.9.0.47 (from 1.10.2015).

For those already using the Ford VCM II with the Ford IDS program.

On the laptop (or OS) where the Ford VCM II with Ford IDS is installed and running, go along the path:

C: \ Program Files \ Ford Motor Company \ IDS \ Runtime \ install3rdparty \ ETAS
or
C: \ Program Files (x86) \ Ford Motor Company \ IDS \ Runtime \ install3rdparty \ ETAS
Regards … (Thanks to vagvag for the information).

Copy and save in a convenient place for you or media, the file is the installer of the VCM II manager running Ford IDS.

Install the Suzuki SDT-2. Run the installer program, after a short time the program will ask you to connect VCM II. It is enough to connect via USB. We connect, only after this the program will be completely installed. (VCM II connected)

The program is installed, turn off VCM II.

We launch the file of the installer of the FORD VCM manager running Ford IDS.

We follow the path: “C: \ Program Files \ VTX-VCI”. We see two folders of VCI Software (6516-Suzuki) and VCI Software (Ford-VCM-II).

We copy the contents of the VCI Software folder (Ford-VCM-II) and paste it into the VCI Software folder (6516-Suzuki).

Reboot. We plug the power of 12 volts through the diagnostic tool, the VCM II is plugged, we connect the VCM II via USB to the laptop. There will be, as usual, installation of drivers.

Launch the VCM II Manager. The Start button \ All Programs \ Bosch \ VCI Software (6516-Suzuki) \ VCM Manager (6516-Suzuki). Click Connect. A green quote appears in the VCM image. Click on Show Details. Look, in the lines of the PC S / W Version and VCM II S / W Version, the numbers match. At the top of the picture VCM Manager inscription VCM II Manager (Ford-VCM-II). It should be so. We close VCM Manager.

We launch Suzuki SDT-2. We rejoice.

When working with the program. Connected the scanner to the car, waited for “peak”, connected via USB to the laptop and run Suzuki SDT-2. If necessary, we switch to the required language via the System Configuration (Russian is present). I have an eng OS and the program was installed with a sample of English. We are working. The program is simple, I think the questions should not arise.

Good luck!

(credits to Demserzh)

Suggestion from real pros working for obd2tool.com:

Unknown risk might happen.

For sake of security, you’re advised to have a machine for Suzuki only.

Suzuki diagnostic: GM Tech 2 HQ clone or genuine

Suzuki key programming: Obdstar F109

PIN Calculator

20-4 digit Pin Code

Immobiliser

Select from vehicle

SX4
Swift
India
12-16
06-10
Other
05-
96-04
Alto
03-
Type 1
Type 2
96-02
Vitra
Type 1
Type 2
Type 3
Type 4
Liana
Alivio
Baleno 96-01
Grand Vitara
Wagon R
Jimny
Ignis
RIZT 07-15
BREZZA
Select from type
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Type 8
Type 9
Type 10
Type 11
Type 12
Smart key system
Alivio
S-CROSS
Vitra

Suzuki odometer correction: Obdstar F109

Grand Vitara
Type 1 D70F3421
Type 2 D70F3422
Kizashi D70F3422

Enjoy!

VCM II “error license for function Passthru” Solution

 

Have VCM2 clone and when I install the patch file, I get message ” error license for function: Passthru” and “Device error”. I install Ford IDS V112, Mazda IDS V107.

OBD2TOOL engineer solution:

Ford_IDS Installation package:
https://mega.nz/#F!fcoVnYZT!jpEjr4HHXU5Ifg8Hm0xERg

Mzd_IDS Installation package:
https://mega.nz/#F!bMg1ECzT!BjEMSq1TUvdgn2aT2CKTEg

Ford_Mzd patch:
https://mega.nz/#F!OV4RRC6B!seCWP6UCzOPWEDYlQxZ1iQ

Virtual machine Ford IDS 106 CN: https://pan.baidu.com/s/1yhbR1yTrr5B0rKKhTrmQMw? Password：v8pg?
Virtual machine Ford IDS 106 EN: https://pan.baidu.com/s/13_oIwio1Eehl_usP6CgbWw Password：i2ku

How to Install Ford IDS Diagnostic Software

Here is a easy step-by-step guide on Ford IDS diagnostic software installation guide.In this article introduce two versions of Ford IDS Software installation guide:

Before installing Ford IDS,you need to download it from below article link:

Ford IDS v106 Software Free Download

Download Microsoft .NET Framework (need install this before)

*1 Ford IDS Official original version installation Guide:

Step 1:After downloading the Ford IDS software,run the IDS.EXE in the installation package.

Wait for the IDS – InstallShield Wizard to prepare setup.

Step 2:Ensure the correct language is selected then click Next. Wait for the progress bar to complete.

Step 3:Click “Next”

Select I accept the terms of the license agreement, then click Next.

Step 4:Read the IDS and Firewall Compatibility page, check I have read and understand the firewall compatibility warning. Then click Next.

Do not change the drive location, then click Next.

Step 5:Click the Install button when ready to install software.

IDS software installation has started.

Step 6:Read the Install Calibration Reminder, check I have read and understand this reminder, then click Next.

Select Yes, I want to restart my computer now. Then click Finish.

IDS Software Licensing

A new IDS Software Licensing subscription process, released in 2011, replaces the current VCM/IDS subscription process. A unique license is required for each computer where IDS is installed. Vehicle communication through the VCM is disabled without an active license.

The IDS Software – Evaluation License dialog box will appear if your computer does not have an active licensed installed. Follow the onscreen instructions.

Access IDS > System Utilities > License Management for further information on IDS Software Licensing.

*2 Ford IDS crack version Installation Guide:(take IDS v97 as a example)

Install V81 calibration files

Install V91 IDS

(Should have 3 day trail information after install V91 IDS, otherwise fail to install, quit the IDS.)

Install VCM2 IDS V96. if IDS V96 runs well, continue operation

Install IDS V97, make sure it runs OK

Finally install the VX Driver you just download above

Test and diagnose cars

Install frozen software

How to solve Ford VCM2 IDS Testman Error

 

Offer the solution to Ford VCM2 IDS Testman error when diagnosing F – Series Super Duty.

Vehicle: F – Series Super Duty

Engine Type: Direct Injection – Turbo

Capacity: 6.0L

Transmission: Automatic

Fuel type: Diesel

Emission level: 50 state emission

Ford scanner to use: VCM2 running IDS software

Error:

Testman error 12 56 253662

IDS Testman Error Solution:

You have to install IDS patch, download and install the patch here:

https://mega.nz/#F!AooiHQrR!WsDPAmflZTrFsaKmLT7G8w

Good luck!

VCM II “error license for function Passthru” Solution

 

Have VCM2 clone and when I install the patch file, I get message ” error license for function: Passthru” and “Device error”. I install Ford IDS V112, Mazda IDS V107.

OBD2TOOL engineer solution:

Ford_IDS Installation package:
https://mega.nz/#F!fcoVnYZT!jpEjr4HHXU5Ifg8Hm0xERg

Mzd_IDS Installation package:
https://mega.nz/#F!bMg1ECzT!BjEMSq1TUvdgn2aT2CKTEg

Ford_Mzd patch:
https://mega.nz/#F!OV4RRC6B!seCWP6UCzOPWEDYlQxZ1iQ

Virtual machine Ford IDS 106 CN: https://pan.baidu.com/s/1yhbR1yTrr5B0rKKhTrmQMw? Password：v8pg?
Virtual machine Ford IDS 106 EN: https://pan.baidu.com/s/13_oIwio1Eehl_usP6CgbWw Password：i2ku

How to Install Ford software on Win7 with VCMII Clone

Crack Ford V108.01 is verified working great with FORD VCM clone & original as well as VXDIAG Nano for Ford scanner. There are two optional crack Ford V108.01 for your need.

Reliable source:
Option 1: Multilingual Ford IDS V108.01 Full Software
Price: 66.99EUR
Serve online installation and activation
Ford VCM II clone … (Confirmed ok)
Ford VCM II original  … (Confirmed ok)
VXDIAG NANO Ford IDS… (Confirmed ok)
working flawlessly on win xp /7 32 64 bits with VCMII clone or original, and features in online programming.
Multi Language available: English, French, Spanish, Italian, Polish, Portuguese etc.

Ford IDS V108.01 Installation & activation:
After you complete payment, the supplier will help installation & activation with TeamViewer.

Functions to be achieved:
V108.01 IDS is able to download the latest calibration/software files from ford’s server if your internet connection is available at the time of connecting to vehicles. (Confirmed)
Read and decode fault codes (Confirmed)
Delete fault codes (Confirmed)
Display the system current parameters in digital form (Confirmed)
Combined displaying of data (Confirmed)
Logs Keeping: writing and keeping of digital parameters in memory (Confirmed)
Special functions: changing of permissible setting of blocks, programming etc. (Confirmed)

Option 2: Ford V108.01 (No need activation)
Price: 24.99EURO
Ship 2pcs of CD (4.7GB/per piece)
Install by yourself with installation video demo (Or via remote assistance if any problem)
No need to active
Tested ok on WIN7 (you could try win8 win 10)
Verified working fine with VCMII clone / original as well as VXDIAG NANO for Ford.

Multilanguage available

Ford V108.01 installation (need no activation)

Tip 1: Before installation, please backup the important files on the desktop and disk C, because the next operation will cover the content in the disk C.

Tip 2:
1). If your computer hard drive only has one partition, please prepare a 16GB U flash drive. 2). If has 2 partitions, please unzip the software of CD  into any other partition except disk C.

Procedure:

Open disk D and create a new folder “Ford V108”, then open CD-ROM to copy all files and paste them into the new folder “Ford V108”.

Right-click the Ford V108 disk (E:) then select “Eject”.

Again open the CD-ROM disk (E:) and copy all files and paste them into the disk D new folder “Ford V108”.
Open disk D: Ford 108, right click “Ford 108. part01” and select “Extract here”.
Choose all of “Ford 108. part01 to “Ford 108. part33” and delete them, then left the following 3 ones.

Open “Ghost 8.0”.
Open “D:\Ford 108\ford103.GHO” , click on “Confirm” and “Yes” to agree the program to restore the partition C (1:1) from D:\Ford 108\ford103.GHO.

The program proceeds complete, if you want to restart the computer?

Click the first option “Restart now”

Installation device driver software.

Restart computer now.

Reset the screen resolution according to your computer need.
Right click “Ford Extending Programming” then click on “Run as administrator”.
Get message “Module programming is enabled until 2016/09/25. Click YES if you want to extend by 120 days from today.”

Click yes.

Get message ” Module programming has been extended to 2018/05/26. Return this app if another extension is required. Click “OK”.

Click on “Start” on the desktop, then “All programs”, then Bosch and find “VCI Manager (Ford VCM II)

Get message “PC Software initialization error (GetModule Type), click “OK”

Open “Computer – Local Disc (C:) – Program Files – Ford Motor Company – IDS – Runtime- Install3rdparty – ETAS – right click on “Setup” then “Run as administrator”.

Bosch VCI software (Ford VCM II) setup

Again right click on “Setup” then “Run as administrator”.
Click NEXT until you see Bosch VCI software (Ford VCM II) InstallShield Wizard completed.

Click on the desktop “Start” then “VCI Manager (Ford – VCM -II)”

Get message “Not connected to VCM II”

Exit and connect VCMII interface to the computer and the Ford model by following the below diagram.

The two indicator flash.

Right click “Computer ” – “Manage” – “Device Manager” , you can see “ETAS VC I USB RNDIS Device”, that means the VCMII communicates a good communication with the computer.

Click “Open Network and shared Center”, then “Change Adapter Setting”, Local area connection is enabled.

Open “IDS”
Click on “Start New Session” then “All other” and “√”

Establishing communication to PCM.

Select vehicle specification.

If the vehicle specification is correct, click “Yes”.

Module Programming.

Programmable Module Installation.

Module Reprogramming on…

Programmable Parameters

As – Built

Exit

Self test – All CMDTCs

Read DTCs…

Go on operating Ford VCM…